One of a Kind Spring show

One of a Kind Toronto Spring show opened today at Exhibition Place and will run for five days until Sunday March 31.

The 3D printers and a glimpse of the jewellery at the Hot Pop Factory booth at OOAK

3D printers and a glimpse of the jewellery at the Hot Pop Factory booth at OOAK

OOAK has been running for many years and is one of the largest shows of handmade objects, art and crafts in Toronto. It’s huge. You likely know all about it, so I won’t go into too much detail.

A couple of interesting new things that are worth looking out for when you visit:

3D Printing Shop
The most delightful thing I stumbled upon at the Spring OOAK was Hot Pop Factory, a 3D printing shop with a very stylish jewellery collection. They also make custom 3D portraits, scanning your head on-site and producing a miniature custom bust within a few days. There’s a 3D printer operating in their booth and it’s great to watch it in action.

I love the new directions that are opening up to artists and makers and it’s great to see 3D printing outfits in high-profile craft shows such as OOAK. May there be more art enabled by new technologies everywhere and soon!

Etsy section
For the first time this year, there is an Etsy-branded section, with a sampling of about 40 artisans from the thousands who have online shops at the largest virtual marketplace for handmade goods. Etsy is currently trying to raise its profile in Canada and their section at OOAK is part of this effort.

Etsy section at OOAK

Etsy section at OOAK

As with many things that sell well online, the crafts on Etsy tend towards the lightweight and inexpensive, and most artists in this section are first-time OOAK exhibitors. Both of which factors probably contribute to this section being set up as tightly and compactly packed as it is.

There are many Toronto Etsy Street Team members in both the Etsy and the Rising Stars sections,  including Ele Willoughby (minouette)featured recently on this blog – whose science and nature-themed prints are gorgeous in real life.

Canadian Visual Artists: Ele Willoughby (aka minouette)

Ele Willoughby (aka minouette) is a marine geophysicist and printmaker from Toronto, whose linocuts and woodblock prints are inspired by science and the natural world. Clicking on any image in this post will take you to the artwork’s listing in the Minouette Etsy shop, where they can be viewed in greater detail.

Lise Meitner and Nuclear Fission linocut from minouette's History of Physics series

Lise Meitner and Nuclear Fission linocut from minouette’s History of Physics series

It seems you have achieved an uncanny synergy of science and art in your life – is the relationship fully symbiotic or do you ever find these two forces in conflict?  

For me, the intersection of art and science is a really fertile source of inspiration – I even write a blog about it called magpie&whiskeyjack. I think that most people have been misled that art and science are very different – that science is constrained whereas art is free and creative. In truth, science is a very creative activity. Scientists are always problem-solving and inventing new things: tools, techniques, or stories about how things might work (also called hypothesis making). Art can also be constrained – there are often specific procedures which must be followed when working in certain artistic media that are very much like executing an experiment.

A Tower of Giraffes linocut illustrates the collective noun for a group of giraffes

A Tower of Giraffes linocut illustrates the collective noun for a group of giraffes

I’ve used artistic skills as a scientist, both when it comes to designing tools and to scientific visualizations and communications. Building a prototype geophysical imaging device is not unlike building a sculpture. You spend a lot of time in hardware stores thinking about whether things can be adapted to your purpose, which is the sort of behaviour artists will recognize.

I’ve also used a lot of my scientific skills and knowledge in my art (incorporating electronics or thermochromic inks and using the history of science as subject matter). So, I would say that for me the relationship between art and science is symbiotic.

However, these two interests, or perhaps hemispheres of my brain, do occasionally conflict. When I’ve had a difficult day in the lab, you’ll find sketches in my lab book. I find scientific colleagues don’t think about colour in design the way I do – occasionally I’ve found a battle on my hands when arguing for certain scientific visualizations.

Bacteria surrounding Louis Pasteur in this portrait are printed in thermochromic ink and disappear when heated - just like in pasteurization!

Bacteria surrounding Louis Pasteur in this portrait are printed in thermochromic ink and disappear when heated – just like in pasteurization!

As an artist, I find I can really enjoy the work of other artists who use science as inspiration, but I personally could never use, say, a diagram or some sort of scientific apparatus for strictly aesthetic reasons – they aren’t just decoration. So, in that sense, the education does influence the way I think, and hence the art I create.

As a scientist, you build machines for underwater imagery and you also get to use them in marine expeditions. What was your most memorable, terrifying or awesome experience while at sea and did you have to wait till getting back home to make art inspired by it?

Sailing Ship II - block print with mixed papers by minouette

Sailing Ship II – block print with mixed papers

Goodness, I do have some stories. It would be hard to choose which one to tell! I’ll tell you about one experience which was difficult, then amazing, and which did inspire new art.

Several years ago, I was working offshore Vancouver Island on a Canadian Coast Guard vessel with a team of university researchers. I had been working on a method which allows me to measure the stiffness of seafloor sediments by lowering an instrument to the ocean bottom. We decided that it would be great to get a really long dataset, but that we couldn’t stay put; rather than lowering the instrument to the bottom and holding station for hours, we could let it fall to the bottom and retrieve it later.

Continue reading » » »